ALROH2MOWER
CONTROLS & BENEFITS
Congratulations
Thank you for buying a quality designed and manufactured Australian made product. Before operating the mower, we recommend that you read this op- erating guide and the engine manual. THINK SAFETY AT ALL TIMES!
7
Cutting Height
It is important to set your mower to the correct cutting height to suit your lawn type. This could vary from 35mm for the new style soft buffalo to 8mm for the bowling green finish!
The cutting height might also be changed on a seasonal basis. Scalping a lawn during the winter can take a long time to recover and cause stress in hot dry summer spells.
Fortunately, your Alroh mower has a robust quick turn knob to allow easy height changes to be made. Clockwise turns raise the cutting height and anticlockwise lowers it. Tilting the mower to lift the front roller off the ground makes it easier to turn the knob when raising the cutting height.
Uneven Cutting
Your Alroh mower has been fitted with independent adjusters for both the front and rear rollers on the non chaincase side.
These have been preset at the factory but should they become mis- aligned due to a severe knock or dropping, we recommend that you consult your local authorised dealer for adjustment.
Chains & Belts
Periodic adjustment of the mower belts and drive chain is required during the life of the mower. We recommend annual service of the mower by your local authorized dealer so that these adjustments can be made.
Correct chain and belt tension will ensure that the pulleys and sprockets will give long and reliable service.
2 | 7 |
