High Resolution
Color CCD Camera
■INSTALLATION PRECAUTIONS
-The mounting bracket must be mounted to a structured member such as a wall or ceiling after using suitable fastener by install guide.
-The maximum recommended load of the mounting bracket is 5Kgs.
-If user uses a over spec adaptor, then camera is not working.
-Adaptor Spec : AC 24V Class 2 power supply (AC24V/DC12V)
■FUNCTION
•ESC ON / OFF
•BLC ON / OFF
•Internal / Line Lock
•AWB / ATW
•AUTO IRIS LENS (VIDEO / DC)
AC24V / DC12V
■VIDEO- TYPE & DC TYPE AUTO IRIS LENS INSTALLATION AND ADJUSTMENT
The camera supports
To install and adjust a VIDEO or
-Thread the
-Solder the lens control wires to the connector (cf. Table 1)
-Plug the connector into the auto iris jack
-Select lens switch and set ESC mode to OFF
-Apply power to the camera
[TABLE. 1 : PIN CONFIGURATION OF | [FIG.1 : | ||
Pin |
| ||
1 | Voltage + | Damp Coil – |
|
2 | Open | Damp Coil + |
|
3 | Video | Drive Coil + |
|
4 | Ground | Drive Coil – |
|
