51

52

53 54

50 51

50

55 56

56. RETURNS SOLO

This switch operates just like the channel SOLO [27] switches — engaging it sends signals to the control room, headphones, and meters, and interrupts whatever happened to be there before you soloed. It follows the MODE [44] switch setting as well. The only difference is that when you engage this RETURNS SOLO switch, it sends all four STEREO RETURNS signals to the SOLO circuit.

Assume you want to solo the snare drum. Hit that channel’s SOLO switch, and you get the “dry” (no effects) snare only. That helps, but you want to hear it with the reverb you have patched into a STEREO RETURN. Leaving that channel’s SOLO switch engaged, also engage the RETURNS SOLO switch, and now you’ll get the dry snare and its reverb.

Since it is a global feature, you’ll also get the signals from all the other STEREO RETURNS, so there may be some sounds that you didn’t want to hear. If they offend your sensibilities, simply turn down the STEREO RETURNS LEVELS [51] you don’t want to hear, or MUTE

[30]the channels feeding the unwanted signal to the effects device you do want to hear.

Congratulations! You’ve just read about all the features of your 1642-VLZ3. You’re probably ready for a nice cup of tea. Go ahead. The rest of the manual can wait.

Manual Owner’s

55. C-R/PHNS ONLY (for RETURN 4)

Once again, the default for all the STEREO RETURNS

[7]is to feed them directly into the main mix. You’ve just learned about the optional exceptions involving STEREO RETURN 3. Not wanting to be left out, STEREO RETURN 4 also has an optional exception: By engaging this C-R/PHNS switch, you will remove STEREO RE- TURN 4’s stereo signal from the main mix and send it di- rectly to the CTL ROOM/PHONES SOURCE [42] matrix. It matters not if any of the SOURCE matrix switches are assigned, but it will be interrupted, as usual, if a SOLO switch is engaged.

Let’s pretend you’re doing a live mix to a 2-track deck, a house PA, or both, and you want to play along to a click track. You could run the click track directly into the main mix, but you don’t want the mixdown deck and/or audience to hear it. By gum, this is the switch for you. Similarly, it can be used for voice-over tracks, narration, anything you want heard by the engineer and players but not by the audience and mixdown deck.

Owner’s Manual

23