VLZ3
Appendix C: Technical Information
1642-
Specifications
Main Mix Noise(20
Main Mix fader unity, channel faders down: |
(90 dB Signal to Noise Ratio, ref +4 dBu)
Main Mix fader unity, channel faders @ unity:
Low Mid Peaking | ±15 dB @ 400 Hz |
Low Shelving | ±15 dB @ 80 Hz |
Low Cut Filter | 18 dB/octave, |
| 120 VAC, 50/60 Hz, 50 watts |
Fuse Ratings |
|
1A Slo Blo, 5 x 20 mm | |
0.5A Slo Blo, 5 x 20 mm |
(1 kHz 35 dB gain, 20
Mic in to insert out: | <0.0007% |
(1 kHz relative to 0 dBu, 20
Channel Mute switch engaged: | |
Channel Gain knob down: |
(Mic input to any output.)
20 Hz to 40 kHz: | +0 |
20 Hz to 60 kHz: | +0 |
(Mic in to Insert Send out, max gain.)
150 ohm termination:–129.5 dBu 20
(Mic in to Insert Send out, max gain.)
1 kHz:better than
Mic in: | +22 dBu |
All other inputs: | +22 dBu |
Main Mix TRS out and XLR out: | +28 dBu |
All other outputs: | +22 dBu |
Mic in: | 2.5 kilohms |
Channel Insert return: | 2.5 kilohms |
All other inputs: | 10 kilohms or greater |
Tape out: | 1.1 kilohms |
All other outputs: | 120 ohms |
High Shelving | ±15 db @ 12 kHz | |
Mid Peaking | ±15 dB sweep 100 | |
Low Shelving | ±15 db @ 80 | Hz |
Low Cut Filter | 18 dB/octave, | Hz |
High Shelving | ±15 dB @ 12 kHz |
Hi Mid Peaking | ±15 dB @ 2.5 kHz |
16.7" x 16.6" x 5.2" (425 mm x 421 mm x 131 mm)
Weight18.2 lb (8.3 kg)
LOUD Technologies Inc. is always striving to improve our products by incorporating new and improved materials, components, and manufacturing methods. Therefore, we reserve the right to change these specifications at any time without notice.
“Mackie,” and the “Running Man” are registered trademarks of LOUD Technologies Inc. All other brand names mentioned are trademarks or registered trademarks of their respective hold- ers, and are hereby acknowledged.
Please check our website for any updates to this manual: www. mackie.com.
©2007 LOUD Technologies Inc. All Rights Reserved.
16.6in 421 mm
5.2in 131 mm
5.2 in
131 mm
16.7in 425 mm
19.1in/ 485 mm
(optional Rack Mount Kit)