Console Settings
1.If you have DIO•8 cards installed, set the Tape Input and Tape Output format for each card to ADAT. OPT•8 cards need no configuration.
2.If the D8B is the clock master, set the Sample Rate to either 44.1kHz or 48kHz, and set the Apogee Clock to Internal (in the Digital I/O Setup window). If it is a clock slave, then set the Apogee Clock to Word Clock. Set the Sample Rate to match the Sample Rate selected on the HDR24/96.
ADAT Optical Hookup with OPT•8
Apogee |
|
Clock I/O |
|
Card |
|
Word | APOGEE |
SYNC | |
Clock Out |
|
| Word Clock Out |
| APOGEE |
Word | Word Clock In |
Clock In |
Word |
| Word |
| HDR |
|
| |||
|
| |||
|
| |||
|
| |||
|
| |||
|
| |||
|
| |||
|
| |||
|
| |||
Clock Out |
| Clock Out |
| Sync |
|
| |||
(HDR24/96 |
| (D8B as |
| Card |
|
| |||
as Master) |
| Master) |
|
|
|
|
|
OPT•8 Cards
ADAT Optical Out
Digital•8 Bus
ADAT Optical In
Use one only
ADAT Optical Out
HDR 24/96
Word
Clock In
Word
Clock Out
ADAT Optical In
OPT•8 Cards
D8B Manual • Chapter 4 • page 115