VESA / Omnimount Mounting
The MCU Pro and MCU XT Pro have holes in the bottom panel for mounting to a standard VESA wall mount or floating arm mount, using 75 mm or 100 mm mounting patterns. These holes accept M4 (4 mm) screws. The length of the screw will vary depending on the thickness of the mounting plate. The screw length is calculated by determining the thickness of the mounting plate and adding 0.25 inches to that for the threads to engage the pemnut in the bottom of the MCU Pro (see figure below).
The MCU Pro weighs 16.8 lb (7.6 kg) and the MCU XT Pro weighs 11.0 lb (5.0 kg), so be sure to select a mounting arm or plate that can support the weight of the unit.
Many VESA mounts are designed for
video monitors, and the mounting plate is perpindicular to the desktop surface.
Since it is unlikely that you will want the MCU Pro mounted perpindicular to the desktop, make sure the VESA mount is flexible enough so it may be properly adjusted for your working space.
MCU Pro or MCU XT Pro
0.153 in/3.88 mm | M4 (4 mm) Pemnut | |
(8 places) | ||
Thread Engagement | ||
| ||
(8 places) |
|
0.868 in/22.06 mm Clearance for MCU Pro
0.469 in/11.91 mm Clearance for MCU XT
Manual Owner’s
Mounting Plate
Mounting Plate Thickness + 0.25 in = length of screw
Owner’s Manual | 5 |