Rear Panel
17. USB PORT
This is the USB connection between the MCU Pro and the host computer. Use the USB cable provided to connect this port to a USB port on the computer.
Note: When the MCU Pro is connected to
a computer with the USB connection, it
appears as a 4x4 MIDI device to the computer and DAW application. The MCU Pro control surface appears as Port 1 in the DAW application. Ports
18. PORT 2 [MIDI IN/OUT]
These are standard
19. PORT 3
These are standard
20. PORT 4
These are standard
21. USER SWITCH 1 and 2
These are provided for connecting a momentary footswitch to the MCU Pro that may be used to control functions such as Play/Stop, Rec Ready, Drop In/Out, etc. These functions are usually
22. EXTERNAL CONTROL
This can be used to connect a variable control, like a potentiometer, to control functions such as Master Volume, as determined by the DAW application.
23. POWER CONNECTOR
This is where you connect the supplied external AC power supply to provide power to the unit.
The provided AC power supply is a universal power supply, so it may be connected to an
AC power source between 100 VAC and 240 VAC
24. POWER SWITCH
This switch turns the power on and off.
25. KENSINGTON LOCK
To help prevent theft, the MCU Pro and MCU XT Pro have a security slot designed to fit the popular Kensington security locks. A variety of models are available from their website at www.kensington.com.
Manual Owner’s
MAIN
PORT1 |
| PORT 2 |
| PORT 3 |
| PORT 4 | USER SWITCH | EXTERNAL | UNIVERSAL CONTROL SURFACE | POWER |
(INTERNAL) |
|
|
|
|
|
|
| CONTROL |
| |
= MCU | IN | OUT | IN | OUT | IN | OUT | 1 | 2 |
|
|
EXTERNAL
POWER
7.5V 
3.0A-4.0A
| MIDI | EXTERNAL | POWER |
| POWER | ||
|
|
| |
UNIVERSAL CONTROL SURFACE EXTENDER | IN | OUT |
|
|
| 7.5V |
|
|
|
|
Owner’s Manual | 9 |