PPM1008

Hookup Diagrams

Front Panel

Microphones

 

pressHI-Z

press HI-Z

button

button

 

Adjust

Vocal

Compression

Keyboards

Portable Recorder

SRM450 v2 Powered Stage Monitors

(plays mon 1 output)

Power Amp Mode

 

switch set to

 

Stereo Mains

Rear Panel

Powered Subwoofers

Passive Speakers

(plays main mix below 100 Hz)

(plays stereo main mix)

 

This diagram shows microphones attached to channels 1 and 2, electric guitars connected directly to channels 5 and 6 (with hi-z switch pressed in), and a keyboard attached to channel 7's stereo inputs. A portable recorder is attached to the stereo tape outputs to record the performance.

Mackie SRM450v2 powered monitors are connected to the monitor 1 send, and play as stage moni- tors. The mon 1 controls of each channel allow you to set up a stage monitor mix that is independent of the main mix.

Passive speakers are connected to the speaker-level power output of the powered mixer, and they play the main stereo mix to your audience. Powered subwoofers are connected to the main mix sub out, to reinforce the low end in your system.

Club System

6

PPM1008