Microphones

Acoustic Guitar

 

 

 

 

 

 

 

 

and Mic

Front Panel

Power Amp Mode

 

 

 

 

switch set to

 

 

 

 

Mains/Mon 1

Rear Panel

 

 

 

 

pressHI-Z button

Adjust

Vocal

Compression

Drum

Machine

Power

Amplifier

dual-mono

C300z Passive Stage Monitors

mode

(plays mon 1 output)

Manual Owner’s

Keyboards

SRM150 Powered Monitor

 

 

 

 

 

 

 

 

(plays mon 1 output)

Passive Speakers

 

Passive Subwoofers

House System

 

(plays main mix below 100 Hz)

(plays mono main mix)

This diagram shows microphones attached to the mic inputs of channels 1 to 4, an electric guitar connected directly to channel 5 (with hi-z switch pressed in), an acoustic guitar mic connected to channel 6 mic in, a keyboard attached to channel 7's stereo inputs, and a drum machine to channel 8.

A Mackie SRM150 powered monitor is connected to the monitor 1 send, and acts as a personal stage monitor to the keyboard player. The mon 1 knobs of each channel allow you to set up a monitor mix that is independent of the main mix.

The power amp mode switch is set to play the mono main mix on ch. A, and monitor 1 mix on ch. B.

Passive speakers are connected to the channel A speaker-level power output of the powered mixer, and they play the main mono mix to your audience.

Passive subwoofers are powered by an amplifier connected to the main mix sub out, to reinforce the low end in your main mix.

C300z passive stage monitors are connected to the channel B speaker-level power output of the powered mixer. These play the stage monitor mix 1 to your performers.

House of Worship System

Owner’s Manual

7