Enable

This button simply enables or disables the RTA-31 for a wet/dry comparison.

Preset Toggle Buttons

The up/down arrows, located just to the left of the Preset window, enable you to scroll up or down through either the Factory or User Presets.

Tip: As there is no delay in loading presets, you might try building performances by stacking user presets and toggling between them using the up/down arrows located at the right-hand side of the Preset window. For example, you can quickly switch from a mix EQ to Low Fi and back for an effect, recording the preset switch into automation. Remember to name your presets with similar names as the list is organized alphabetically.

Preset Title Window

The Preset Title window, located at the top of the control bar, displays the currently selected preset that corresponds to the visible EQ or Analyzer curve. Click on the window to open a pull-down menu that selects specific Factory or User presets.

Note: It is possible to save presets to the User Preset folder (which is the default folder) or a folder of your own making. The user presets then point to the last folder you’ve saved or recalled presets from.

Input Select

The Input Select is located directly to the right of the Preset Title window. Use your mouse to select from pre/post insert, auxiliary, or master insert inputs.

The Close button

The X button in the top-right corner hides the GUI, although it is still active, until it is disabled or recalled in the Plugins window of the D8B.

14

Acuma RTA-31