9
Amp assembly replacement continued:
3
6c The led pcb cable attaches to the connector (as shown in picture above) with the white cable closest to the edge of the amplifier assembly.
7 Place the new amplifier assembly (part #0016875) where the old one was. Follow the same steps as above, but backwards 6 to 1. Remove the serial number from the faulty amplifier assembly (as shown in picture above) and place on the new amplifier assembly. Power up the SWA1801z and relish in the fact that you just replaced an amplifier assembly. Hats off to you for a job well done!
8 Important: The faulty amplifier assembly needs to be returned to LOUD
Technologies. The address should be on the return shipping label that was provided with the new amplifier assembly. If not, the return address is at the top of this page. Also, please write the order number and service request number (ex: