6
Woofer replacement continued:
+ 
-
*5 Positive (solid yellow) and negative (yellow and black) cables are still attached to woofer terminals.
Push in
6 Remove cables from terminals simply by pushing down on terminal and pulling out cable.
7 This is what it looks like with the front panel and woofer both removed. Place the new woofer (part #0012184) where the old one was. Follow the same steps as above, but backwards 6 to 1, making sure to keep the led PCB assembly cable in front of the woofer. Power up the SWA1801z and the new woofer should now be pumping out glorious lows. Awesome, you just replaced an 18” woofer!
*This picture was taken during an SWA1501 woofer repair. The same principle applies to the SWA1801z.