4
Led PCB replacement continued:
5 Use the phillips head screwdriver to remove one screw from the center of the led PCB assembly.
7 The hard part is done, the rest is easy! Place new led PCB assembly (part #0007334) where the old one was. Follow the same steps as above, but backwards 6 to 1. Power up the SWA1801z and led should light up. Congratulations, you just replaced an led PCB assembly...now go play some shows!
6 Carefully remove the led PCB assembly from the back side of the front panel. A flathead screwdriver may aid in removal of the led PCB assembly if it is sticking.