5

Woofer replacement:

1 Follow steps 1-4 of led PCB replacement, as the front panel will need to be removed in order to access the woofer.

1 2

83

3 Keep the eight screws in a safe place.

74

6 5

2 Eight screws need to be removed from the woofer using the 5mm allen wrench.

*4 Carefully begin to remove the woofer. A flathead screwdriver may aid in removal of woofer if it is sticking.

Caution: The woofer is approximately 27 pounds with weight unevenly distributed.

*This picture was taken during an SWA1501 woofer repair. The same principle applies to the SWA1801z.