Macrom M-DVD902RV manual Troubleshooting, Problem Cause Solution

Troubleshooting

If operation freezes, the screen goes black or the unit should otherwise not function properly, try turning the unit on and off. If the unit does not respond, press the reset switch on the Front Panel.

Problem	Cause	Solution
	Disc inserted incorrectly	Reinsert the disc with the
		label side up (facing the
Player does not		ceiling).
play disc	Disc format is not	Check the disc format.
	supported
	Disc is dirty or scratched	Clean or replace the disc.
The player		Try turning the player off
suddenly
	Player error	and on. If the player still
stopped working
		doesn’t respond, press the
or the screen
		reset button.
went black
	The car ignition (or	Insert the key into the
		ignition and turn it to
	ACC/Accessory) is off
Player doesn’t		ACC/Accessory.
turn on	Condensation in the player	Wait for about one hour or
		until condensation
		evaporates.
	Battery needs replacing	Replace the battery.
Player operates	Dirty IR window on the	Clean the player’s and the
		remote control’s IR
erratically	Player or remote control	windows.
	Loose connections	Check and tighten all
		connections.
Picture Skips	Disc is dirty or scratched	Clean or replace the disc .
Occasions
		Move the vehicle away
	Interfered by	from the interference.
	short-distanced strong
Blur picture on	interference.
the screen.	(E.g. high voltage wire,
	transformation station or
	aircraft etc…)

27