Macrom M-DVD902RV manual

Models: M-DVD902RV

1 30
Download 30 pages 23.2 Kb
Page 3
Image 3

or servicing of the display by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards.

Be careful not to drain the car battery while using the unit with the car engine stopped. To avoid draining the battery, it is suggested that the vehicle engine always is running while using the unit.

Do not disassemble or alter the unit in any way. Failure to do so can cause damage to the unit and invalid the warranty.

Never clean the surface of the screen with chemical solvent or corrosive detergent, which may cause permanent damage to the TFT LCD screen.

Avoid installing the unit wherever is under direct sunlight or near hot air vent. Please note that the normal working temperature of the unit is between -5to +50. If the internal temperature of the vehicle is extremely high, a short cooling down period is necessary before operating the unit.

If the temperature inside the car is very low and the monitor is used soon after switching on the heater, moisture may form on the panel of the unit. Turn off the unit immediately! Failure to do so may cause the internal components to short. Allow the unit to rest for about one hour to allow the condensation to disappear before continue operation.

In extremely cold temperatures, the movement of the picture may be slow and the picture may be dark. It is not a malfunction. The unit will work normally once it reaches its operating temperature.

Do not drop or hit the LCD panel with a hard object, as it may cause permanent damage to the LCD panel. Should LCD panel break, avoid touching glass and fluid. If do, please clean it with plenty of water and ask for medical attention immediately.

Due to different car specifications, please kindly ensue that the display monitor is properly located and not obstructing the air-conditioning vent. Avoid inserting any foreign objects into the slot of the disc Player. Failure to observe this may cause malfunction due to the precise mechanism of this unit.

Protect your disc. When you leave the car, be sure to eject the disc from this unit and store it separately away from direct sun light.

Heat and humidity may damage the disc and you may not be able to play it again.

Use the supplied screws to fix the monitor Metal Mounting Plate.

2

Page 3
Image 3
Macrom M-DVD902RV manual