10
Once you have stopped playback, the system returns to the normal live signal video display or a grey screen appears with the text `No HDV Signal´.
With the `cut and paste´ function, you can move the position of the films in order to rearrange the order for the `Play all films´ mode.
Simply mark the film you wish to move and press the F2 key to cut. Now, select an (empty) available storage bank and press the F1 key to paste the film in that particular bank.
7.4 The Delete Menu
The Delete Menu allows you to delete existing videos from the banks. Select the respective storage bank and then press the Ok key. Additionally, the text `Remove Video?´ must be confirmed with `Yes´.
7.5 The Export menu
This menu works just like the Playback Menu. However, the item `Play all films´ is missing. Requirement for sending and copying a film is a camera with a recording mode or a recorder.
After selecting a film from a bank and having started it, the material is sent via Firewire/IEEE 1394 to the connected camera or recorder. It is now possible to record the material to a DV tape for example.
Note: Please note that when sending footage to a camera, the system plays the material about a second earlier and a second longer at the end.
This is the time required by the camera to record the material.
When sending, the video is simultaneously displayed on the monitor. This is technically- dependant delayed (like during a record in the Record Menu), so that it is necessary that you monitor the camera picture rather than that of the recorder.
Additionally, the video is displayed on the monitor without interlacing, irrelevant of what you have selected in the menu. As the data stream sent to the camera is not changed, the monitored picture is displayed in this same fashion.
The video does not restart at the end; playback is stopped.
7.6 The Trim Menu
In this menu, you can trim the start and end of