13

example, we had chosen 1920x1200, most projector beamers would show no picture and the user would hence not be in a position to set t the required resolution.

This default setting can be brought back any time by pressing the `Reset monitor´ key for a longer time (app. 10 seconds).

If, for example, the recorder has been used with a 1920x1200 monitor and then is to be used in combination with a 1024x768 projector in the mean time, the projector will initially display no picture.

Press the `Reset monitor´ key as explained above to reset to the default setting of

800x600 pixels. The projector is now capable of displaying the recorder’s menu again. Now you can enter the Display Menu and select the correct monitor mode. Possibly, you may need to select the right mode in the PAL Menu too.

11.Live Feed using a connected camera

If you connect an HDV camera via the Firewire cable and use the camera in record mode (or plays a tape), the video will automatically

be displayed live on the monitor, unless the recorder is currently playing a hard-drive recorded video itself.

(The recorder cannot play a DV signal, only HDV.)