Assigning TCP/IP Values Manually
If you already have a DHCPserver on the network, or if you prefer
not using the XRouter’s DHCPserver to assign TCP/IP values auto-
matically, you can input these values manually.
To enter values for the managing computer’s address manually:
1. Click the IPAddress tab from the TCP/IP properties window.
2. In the IPAddress field enter “192.168.1.x”where x is any
variable of your choice ranging from 2 - 252. Enter
255.255.255.0in the Subnet Mask field.
(NOTE: No two computers on the same LAN can have the
same IPaddress or an IP address conflict will occur.)
3. Click the DNS taband enter the DNS IP addresses provided
by your ISPin the DNS fields.
4. Click the Gateway taband enter a value in the Gateway IP
addressfield. The Gateway IP address value must be the
same as the XRouter's IPaddress; (the XRouter ’s default IP
address is 192.168.1.1).
5. After specifying the settings of TCP/IPclick OK and restart
Windows to allow the settings to take effect.
11