Assigning TCP/IP Values Manually
If you already have a DHCPserver on the network, or if you prefer
not using the XRouter’s DHCPserver to assign TCP/IP values auto-
matically, you can input these values manually.
To enter values for the managing computer’s address manually:
1. In the Connect viamenu select the Ethernet interface that is
installed on your computer.
2. In the Configuremenu select Manually.
a. In the IPAddress field, enter “192.168.1.x”where x is any
variable of your choice ranging from 2 - 252.
(NOTE: No two computers on the same LAN can have the
same IPaddress or an IP address conflict will occur.)
b. In the Subnet Maskfield enter 255.255.255.0.
c. In the Router Addressfield enter 192.168.1.1, the XRouter’s
default address.
d. In the Name Server Addressfield enter the DNS information
provided by your ISP. In the Search Domainsfield enter the
domain information provided by your ISP.
e. Close the TCP/IPwindow and save the changes.
13