Mag Digital CCB7707 Setting of Learning Keys, Installation of Batteries

Open the battery cover on the back of the Remote Controller and put two new AAA 7

batteries into the battery slot according to the signs. After this, please close the battery cover.

Setting of Learning Keys

There are seven learning keys on this remote controller for TV set, VOL+/VOL-, CH+/CH-,

POWER and two custom design keys, C1/C2. All the other keys are for Set Top Box. Make

sure that the TV set's remote controller is working properly, and then set the learning keys as

following steps:

2 Point the signal sender of TV remote controller to the one of this remote controller

directly, and keep the two in 1 to 3 centimeters approximately. Press the key on the TV

remote controller you want to learn(the POWER key, for example), the signal LED on this

remote controller will flash for a while and then keep on shining after receiving this signal,

and then press the key on this remote controller you want to record this signal. After the

red LED flash thrice and keep on shining, this signal is recorded. Please go on to learn

another key.

Installation of Batteries

Installation of Batteries

This product is low power-consumed; two new batteries can last for approximately 12

months. Improper use may reduce batteries' life. Please do not use a new and an old battery

together. If batteries leak, please replace them with new ones immediately. If the remote

controller will not be used for a long time, please pick the batteries out and keep them apart

from the remote controller.