2

Introduction
Congratulations on your purchase of a quality MobileVision Side View Security Camera. This camera
has been designed to provide you with a product that is technologically superior and provide years of
trouble free operation.
The information enclosed provides a quick reference of the operations and maintenance of your new
Side View Security Camera.
This product must be installed and used in accordance with this manual. Any alterations to this prod-
uct that enables it to be used in any way other than intended or designed could distract the driver and
result in an accident causing injury or death. Magnadyne Corporation disclaims any and all liability
that may result from failure to install and operate in any other manner in which this was intended.
Camera Features
1
2
3

1. +12 Volts

4. Video 2. N/A

5. Ground

3. N/A

1. Adjustable Viewing Angle

2. 1/3" Color CCD Camera Lens

3. Waterproof Housing

1. Select a position to mount the camera that is
free of obstructions and moving parts and has
a proper viewing angle of the side the vehicle.
2. Remove the housing from the camera by
loosening the housing screw in the back of
unit using the supplied allen wrench.
3. Use the camera’s mounting base as a tem-
plate to drill mounting holesand a 5/8"
cable pass-through hole.
Mounting the Camera
4. Attach the gasket to the bottom of the
mounting bracket.
5. Align the mounting bracket with pre-drilled
holes then secure bracket with screws.
6. Insert the camera cable into the pass-
through hole. Use silicone to seal the
pass-through hole.
7. Reinstall the housing and tighten the
housing screw.
Housing Screw
Housing Screw
Gasket
Mounting Screw,
Lock Washer and
Washer
(Supplied)