Magnadyne M3200CD manual Specialty Features, Reset Button, Problem Description Possible Remedy

Specialty Features

Reset Button

The radio panel or LCD display may fail to func- tion normally due to the vehicle’s battery condi- tion, and may require resetting the radio micro- processor if:

•The vehicle has been “jump started” from a dead battery condition

•The vehicle battery becomes very low and is quick-charged

•The vehicle battery is removed and replaced

POWER

VOLUME

AMS	1	2
		INTRO

L

3

REP

Should this condition occur, simply press and release the RESET button on the radio panel using the tip of a ball point pen. This will reset the radio microprocessor to the original factory set- tings. After pressing the RESET button you should recheck to see if the radio functions nor- mally. All station programming should remain, but you will have to reset the clock. Should the LCD display area show any abnormal error code, please refer to the trouble shooting guide and solution chart below.

Error Code	Problem	Description	Possible Remedy
ERR 1	Mechanism Problem	Unknown mechanical	1.	Eject the disc and try another.
		problem with the CD	2. Press the reset button.
		mechanism.	3.	Replace the unit.
ERR 2	TOC Reading Error	Laser can not read the	1.	Insert a different disc.
		CD disc table of	2.	Check disc for excessive scratches.
		contents.	3.	Check disc for dirt and fingerprints.
				Clean disc and reinsert.
ERR 3	Error from High	The temperature of the	Reduce the temperature inside the vehicle
	Ambient Temp.	mechanism is too high	and try to play a CD at a later time.
		to play CDs without
		damaging them.
ERR 4	Laser Focus Error	Laser pickup fails to	1.	Insert a different disc.
		focus and read the disc.	2.	Check disc for excessive scratches.
			3.	Check disc for dirt and fingerprints.
				Clean disc and reinsert.
			4. Press the reset button.
ERR 6	CD Loading Error	The loading mechanism	1.	Push the reset button.
		is damaged.	2.	Replace the unit.
ERR 7	Laser Servo Error	Laser servo is not	1.	Press the reset button.
		functional.	2.	Replace the unit.

7