
M4100CDUM.qxd 07/24/03 4:29 PM Page 5
Radio Operation
Listening to the Radio
1.Press the “BAND” button (17) to select a radio band: FM1, FM2, AM or WX (weather band).
2.AM or FM Station Selection:
Automatic Seek Station Selection: Press the
or
button (3) to automatically seek the next strong station.
Scan Station Selection: Press the scan button
(5)to automatically scan through strong sta- tions in the current radio band. The radio will pause for 5 seconds at each strong station. Each time the frequency flashes on the display. Press the scan button again to hold the current station.
Manual Station Selection: Press the or
button for more than 3 seconds to select man- ual station selection, and "MAN" will appear in the display. Use either button to manually seek up and down the frequency scale.
Note: If either button is not pressed for several seconds, the unit will return to Automatic Seek Station Selection and "AUTO" will appear on the display.
Weather Band Station Selection (WX):
Manual Station Selection: Press the or button to manually seek stations.
Programming the Radio
You can program up to 12 FM radio stations and 6 AM radio stations.
Manual Station Recall Programming
1.Press the “BAND” button (17) to select a radio band: FM1, FM2 or AM.
2.Select the desired station.
3.Press and hold one of the six station recall but- tons
4.Repeat the procedure to memorize more stations as desired.
Automatic Station Store
1.Press the “BAND” button to select a radio band: FM1, FM2 or AM.
2.Press the AS/PS button (12) for more than 2 sec- onds, the radio will then search the current fre- quency and check the signal strength until the 6 strongest stations are stored into the correspond- ing preset number button. When completed, it will change to scan preset stations automatically.
Preset Scan
Press the AS/PS button to scan the preset stations. The radio will hold at that preset number for sev- eral seconds, then will scan again. To stop scan- ning when a desired station is reached press the
AS/PS button again.
Sound Controls
Adjusting the Volume, Bass Treble, Balance and Fader
1.Press the SEL button to select the desired audio mode. The audio modes will be display in the dis- play area in the following order: Volume, Bass, Treble, Balance and Fader.
2.Press the VOL or VOL buttons to adjust the sound of the audio mode selected: Volume, Bass, Treble, Balance or Fader.
Initial Volume Level
To program the Initial Volume Level, adjust the volume to the desired level, then press the power button for more than 3 seconds. The next time the unit is turned on, the volume will be at this initial level.
Adjusting the Audio Beep
Press the SEL button for more then 2 seconds to turn beep On/Off. When the beep is on the icon will be displayed.
Adjusting the Loud Feature
Press the LOUD button (18) to increase the bass output, "LOUD" will then show in the display area. Press the button again to release this function.
Mute
In Radio/Aux In mode, press the MUTE button (14) mute audio level. Press the button again to release this function.
5