6 INT
5 RDM
3 PGM
2 MEM
4 RPT
3 PGM
2 MEM
2 MEM

M4100CDUM.qxd 07/24/03 4:29 PM Page 7

CD Operation

Inserting a Disc

Push the Open button (13) to open the front panel. Insert a disc into the CD Slot, label side up, and the disc will begin to play automatically.

Ejecting a Disc

Push the Open button to open the front panel. Press the EJECT button (15) to stop CD play and the disc will be ejected.

Select Tracks

Press the or buttons to move to the previ- ous track or the following track. The track num- ber appears in the Display Area.

Fast Forward and Fast Reverse

Press and hold the or buttons to fast for- ward or fast reverse. Disc play starts from when you release the button.

Pause Disc Play

Press the MUTE button (14) to pause the CD play- er. Press it again to resume play.

Repeat the Same Track

Press the button (9) to continuously repeat the same track. Press it again to stop repeat.

Play All Tracks in Random Order

Press the button (10) to play all tracks on the current disc in random order. Press it again to stop random play.

Intro Scan

Press the button (11) to play the first 10 seconds of each track. Press it again to cancel the function and listen to the track.

Program CD Tracks

Use the Program function to select up to 32 CD tracks to play in any order. The Program function allows you to select a track number for each spot in the playing sequence. A CD must be inserted to use the Program function.

1. Press the button (7) to enter Program mode. PGM starts flashing and the “P-01” appears in the display.

2.Press the or button to choose a track num-

ber. Then press the button to memorize it. Select the next track and it will be memorized as “P-02”.

Repeat these steps to program tracks in the

desired order. Then press the button to play the CD in programmed order. When you have programmed 32 tracks, “FULL” will appear on the display.

• When the CD is playing in program order, press the 3 PGM button to exit the PGM mode.

• When the CD is playing in programmed order, pressing the 2 MEM button will clear all the pro- grammed content and “CLR” will appear in the display.

• If you don’t press the button to carry out

program setting, press the button for sev- eral seconds, “NO-P” will appear in the display.

Track/Time Display

To display the running time/remaining time of track, press the AS/PS button (12).

7

Page 7
Image 7
Magnadyne M4100CD manual CD Operation