Magnadyne M5100CD General Operations, CD Changer Operation Optional, Setting the Clock

M5100CDUMFinal 2/1/05 4:58 PM Page 5

General Operations

Setting the Clock

1.Press DISP button (13) for more than 3 seconds until the clock shown in the display area is flashing.

2.Press the TRK/TUNE DN button to adjust the hours

3.Press the TRK/TUNE UP button to adjust the minutes.

Display Priority

Clock Display Priority

Press and hold DISP button (13) while pressing the TRK/TUNE DN button to select Time Priority. Pressing the DISP button while in Time Priority will temporarily display selected station frequency.

In CD Mode:

When the display priority is set to “Time”, the time will be displayed.

Pressing DISP button will temporarily display CD track number, time remaining or elapsed time depending on current CD display option selected. After 5 seconds the display will return to the clock.

Frequency Display Priority

Press and hold DISP button while pressing the TRK/TUNE UP button to select Frequency Priority. Pressing DISP button while in Frequency Priority will temporarily display clock.

In CD Mode:

When the display priority is set to “Frequency”, the CD track number will be displayed.

Pressing the DISP button will temporarily display the clock. After 5 seconds the display will return to the CD display.

Selecting a Mode

Press the MODE button (3) to step sequentially through the following sources: Radio Mode to Radio Tuner > CD > CD Changer (optional) > Auxiliary > Radio Tuner.

Illumination Dimmer

Press LOUD/DIMMER button (2) for more than 2 seconds to adjust the brightness of the LCD display backlight.

Reset Button (20)

The Reset Button (21) is located behind the Waterproof CD Cover (22) and above the CD Slot. Activate the reset button with either a ballpoint pen tip or paper clip for the following reasons:

•After initial installation of the unit is completed.

•When the function buttons do not operate.

•Error symbol in the display.

If there is a disc in the slot when the reset button is pressed the disc will be ejected.

CD Changer Operation (Optional)

Select a Disc

1.Load your CD Changer with compact discs per the manufacturer's operating instructions.

2.Press the SCAN SHIFT button (15) to enter Shift Mode. “SHIFT” will then appear in the display, indicating the CD Changer is active.

3.Press the TRK/TUNE DN or TRK/TUNE UP (5) button to scroll through the CD’s loaded in the CD Changer. If there isn’t any operation for several seconds, the unit will exit Shift Mode automatically.

Notes on CD-Rs and CD-RWs:

•The unit cannot play a CD-R and CD-RW that is not finalized. (Please refer to the manual of your CD-R/CD-RW recorder or CD-R/CD-RW software for more information on the finalizing process).

•This unit will not play MP3 music or WMA music recorded on any CD-R or CD-RW disc.

•Be sure to only use discs with the following labels in this unit:

5