Magnadyne M9850 manual Programming, Using the Fast Forward and Rewind Controls, Cassette Operation

Models: M9850 M9860f

1 16
Download 16 pages 62.25 Kb
Page 11
Image 11
Programming

Cassette Operation

Programming

 

 

Using the Fast Forward and Rewind Controls

The two buttons located to the right side of the tape opening (10) are the fast forward and rewind buttons (11). While the tape is playing you can use these buttons to fast advance the tape to search for special sound tracks or rewind the tape to listen to it from the beginning. To operate these but- tons, simply press one or the other in until it locks. To release it, press the opposite button slightly. The “FF” button will always fast advance the tape forward and the “REW” button will always fast rewind the tape.

Listing to the Radio Tuner While Fast Advancing the Tape

To listen to the AM/FM radio while the tape is rewinding or fast forward- ing, press the “R.FREQ” button after the FF or REW button is pushed. This will turn on the radio tuner until the

FFor REW button is released and the tape begins to play again. Once this feature is turned on, each time the “FF and “REW” buttons are pushed, the radio tuner will come on auto- matically. If you want to turn this fea- ture off, press the ‘R.FREQ” button while the tape is fast forwarding or rewinding. The tuner will be off.

Programming the Radio Station Recall Buttons

1.Rotate knob (1) clockwise to turn on the unit. Adjust the volume knob (1) to a low listening level.

2.Use the band button (4) to select the AM or FM radio band you want to memorize a radio station. The FM band has 3 banks (FM 1, 2, and 3). The AM band has 2 banks (AM 1 and 2). Continue pressing the band button (4) until the desired radio band is displayed (9a).

3.Use the tuning button (5) to select a desired radio station. Press the “ <” (up) button to tune to higher radios stations. Use the “<” (down) button to tune to lower radio sta- tions. Pressing and releasing the tuning control buttons (5) will cause the tuner to move up or down two decimal increments. Pressing and holding the up or down tuning buttons (5) will cause the tuner to count up or down at high speed.

4.Once the desired station is select- ed, press and hold down one of the 5 station recall buttons (13) until the channel indicator (9d) is displayed, release the button. The station is now memorized to the band indicated (9a) and the recall button indicated (9d). Repeat pro- cedures 2 thru 4 for all 5 preset buttons.

5.Select another radio bank and repeat steps 2 thru 4 above to memorize all 15 FM radio stations

and 10 AM radio stations.

11

Page 11
Image 11
Magnadyne M9850, M9860f manual Using the Fast Forward and Rewind Controls, Programming the Radio Station Recall Buttons