Introduction
Your new AM/FM/WB cassette unit incorporates a microcomputer man- aged electronic AM/FM stereo tun- ing system and FM Optimizer along with rugged auto reverse cassette mechanism. The two as a combina- tion will provide the user with the finest crystal clear AM/FM stereo radio broadcast reproduction and flawless reproduction of your person- al cassette tape library.
To insure trouble free long term per- formance from your new unit, please
take a moment to read this manual completely to make yourself aware of all basic radio operation and memory setting procedures.
Also at this time, it would be a good idea to write down the serial number of the unit in the space provided. In the unlikely event that the radio will need warranty service, you will need this number to obtain the service.
Serial # ________________________
Mechanical Installation
Space Requirements:
To mount your new AM/FM cassette unit, you will need a rectangle hole in the mounting location 182mm (width) x 53mm (height), (7⁄8” x 2 1⁄8”) and a full 6” of unobstructed space behind the mounting location.
Step 1:
After obtaining the required space and mounting hole dimensions required, remove the mounting sleeve from the unit. Insert the mounting sleeve into the hole on the dashboard. Secure it by bending the tabs inward as shown in fig 1. Select the appropriate tab according to the thickness of the dashboard.
Step 2:
Bring the power, ground, antenna and speaker wires through the center of the mounting sleeve. Make all the speaker and power connections to the main harness supplied with the unit. Refer to the “wiring” section of
this unit for proper connection. After all the connections have been made and are correct, plug the harness and the antenna cable into the mating plugs located on the rear of the unit.
Step 3:
Turn on the ignition key and do a
Step 4:
Securely attach the rear support strap provided to the rear of the unit with the fasteners provided. Bend the strap to allow the unit to slide into it’s mounting sleeve. Reach up behind the unit and grab the strap while slid- ing the unit into the mounting sleeve until it snaps into place. Secure the end of the strap to a solid portion of the dashboard structure or the fire wall.
2
