Magnadyne M9900CDS manual Default Settings

Models: M9900CDS

1 16
Download 16 pages 44.1 Kb
Page 12
Image 12

Default Settings

The M9900CDS has a small group of settings that can be changed to suit your personalized requirement.

Button Confirmation Beep: The factory default setting is BEEP ON (a confirma- tion beep every time a button or knob is pushed). To turn the beeps off, push and hold the VOLUME knob until “BEEP ON” is in the display then release.

Rotate the VOLUME knob until “BEEP OFF” is in the display. Wait a few seconds, the radio will return to last radio mode selected.

VOLUME

PUSH SEL/

MENU

Power Up Volume Level: The factory default setting for initial power-up volume

VOLUME

level is 12. To change the initial volume level, push and hold the VOLUME

PUSH SEL/

MENU

knob until “BEEP ON” is in the display then release. Push the VOLUME knob

 

until “P-VOL” is in the display. Rotate the VOLUME knob until the desired ini-

 

tial volume is achieved. Wait a few seconds, the radio will return to last radio

 

mode selected.

 

 

 

Radio Frequency Display: The factory default setting is USA. Do not change this setting.

Clock Display When the Radio is Off: When the ignition key is on and the radio is off, “clock display on” is the default setting. To change the setting to “clock display off”, push and hold the VOLUME knob until “BEEP ON” is in the dis- play then release. Push the VOLUME knob until “CLK ON” is in the display. Rotate the VOLUME knob until “CLK OFF” is in the display. Wait a few seconds, the radio will return to last radio mode selected.

VOLUME

PUSH SEL/

MENU

Display Priority: The factory default setting for display priority is “CLOCK” except in Sirius mode. To change the display priority (either radio frequency priority or no priority), push and hold the VOLUME knob until “BEEP ON” is in the display then release. Push the VOLUME knob until “CLOCK” is in the dis- play. Rotate the VOLUME knob until “FREQ” or “NO PRI” is in the display. Wait a few seconds, the radio will return to last radio mode selected.

VOLUME

PUSH SEL/

MENU

Clock Type, 12 hour or 24 hour: The factory default setting is 12 hour clock with AM and PM indication. To change the clock type to 24 hour military time, push and hold the VOLUME knob until “BEEP ON” is in the display then release. Push the VOLUME knob until “12 HOUR” is in the display. Rotate the VOLUME knob until “24 HOUR” is in the display. Wait a few seconds, the radio will return to last radio mode selected.

VOLUME

PUSH SEL/

MENU

12

Page 12
Image 12
Magnadyne M9900CDS manual Default Settings