Magnasonic DVD816B instruction manual Video Setup, Component, TV Mode

D) VIDEO SETUP

The VIDEO SETUP options are illustrated below:

zCOMPONENT

CVBS : Choose this setting when your DVD player is connected to your TV via the normal RCA or S-Video output.

YUV : Choose this setting when your DVD player is connected to your TV via the COMPONENT output - YUV.

RGB : Choose this setting when your DVD player is connected to your TV via the COMPONENT output - RGB.

VGA : Choose this setting when your DVD player is connected to the computer monitor via the VGA output. Warning : If you are not sure about the connect, please always select the CVBS. Otherwise, the output screen to the TV/Monitor will be blank.

If you have wrongly selected the video output type and you got the blank screen on your TV/Monitor, please press the RESET button on the remote control to restore the pre-factory setting – CVBS.

zTV MODE

P-Scan : Choose this setting when your DVD player is connected to your TV via the COMPONENT output – YUV or RGB and your TV type should be Progressive Scan type.

Interlace : Choose this setting when your DVD player is connected to your TV via the COMPONENT output – YUV or RGB and your TV type should be normal interlace type.

Warning : If you are not sure about the connect, please always select the INTERLACE. Otherwise, the picture output to the TV/Monitor will be distorted.

If you have wrongly selected and you got the distorted picture on your TV/Monitor, please press the P/I button on the remote control to restore the pre-factory setting – INTERLACE.

Note :

This setting is only selectable as long as you have selected YUV or RGB from the Component setup sub-menu.

Page 19