Magnavox 15MF/20MF owner manual If your antenna has a round cable

ANTENNA CONNECTION

Acombination antenna receives normal broadcast channels (VHF 2–13 and UHF 14–69).

Your connection is easy because there is only one 75 Ω(ohm) antenna jack on the back of your TV, and that’s where the antenna goes.

1	If your antenna has a round cable
	(75 ohm) on the end, then you’re ready to
	connect it to the LCD TV. If your
	antenna has flat, twin-lead wire (300 ohm), you
	first need to attach the

Outdoor or Indoor Antenna (Combination VHF/UHF)

Rear Jack panel of

� Television

antenna wires to the screws on a 300- to

75-ohm adapter(not supplied).

Connect the antenna (or adapter) to one end

2 of the supplied L-Adapter as shown, and con-

Twin-lead wire to 300-75�adapter

�

nect the other end of the

L-Adapter to the TV jack on the side of

the LCD TV.

OR

Antenna with 75 �

cable L-Adapter

BASIC CABLE TV CONNECTION

Your Cable TV signal into your home may be a single, 75Ω(ohm) cable. If so, this connection is

very simple. Follow the step below to connect your Cable TV signal to your new LCD TV.

1 Connect the Cable TV signal to one end of the supplied L-Adapter as shown, and connect the other end of the adapter to the TV jack on the

LCD TV.

Rear Jack panel of

Television

The Cable TV signal from Cable Company

(75 � coaxial cable)

�

L-Adapter

8