Optional Connections, Analog Stereo Hookups | Magnavox 19MDTR20

19MDTR20(1-49).QX33 03.3.28 11:52 Page 10

10 Optional Connections

Analog Stereo Hookups

If you want to hear the TV/VCR/DVD sound through a stereo instead, make this connection.

1 Complete the antenna/Cable TV connections. Details are on pages eight- nine.

2 Connect red and white audio cables to the red and white AUDIO OUT jacks on the back of the TV/VCR/DVD and to the AUDIO IN jacks on the stereo. Match the cable colors to the jack colors. Audio cables are not supplied. Use RCA-style cables.

3 Set your stereo to Auxiliary In or the correct “Source” mode. See your stereo owner’s manual for details.

Audio cables

to red and

white AUDIO OUT jacks on TV/VCR/DVD

L

AUDIO OUT

R

COAXIAL

Audio cables to

Stereo’s AUDIO IN jacks

Digital Stereo Hookups

You can connect the TV/VCR/DVD to a Stereo that has a Digital Coaxial In jack. Use this hookup if you want to hear the TV/VCR/DVD sound through the Stereo instead. Use these connections for a Dolby Digital-compatible Stereo or for a Receiver that has a Mini-Disc or Digital Audio Tape deck.

1 Connect the antenna/Cable TV signal. Details are on pages eight-nine.

2 Connect a digital audio coaxial cable (not supplied) to the orange COAXIAL jack on the TV/VCR/DVD.

Also connect the cable to the Stereo’s COAXIAL DIGITAL AUDIO IN jack.

3 If the Stereo is Dolby Digital-com- patible, set DOLBY DIGITAL to ON. If the Stereo is not Dolby Digital- compatible or if you connected to a Mini-Disc or Digital Audio Tape Deck, set DOLBY DIGITAL to OFF. Details are on page 72.

An incorrect setting causes noise distor- tion and damages speakers.

To see if your Stereo has Dolby Digital, look for a Dolby Digital logo on your Stereo. Or, refer to the Stereo owner’s manual.

To orange

COAXIAL jack

on TV/VCR/DVD

L

AUDIO OUT

R

COAXIAL

To Stereo’s COAXIAL

DIGITAL AUDIO IN jack

Helpful Hints

•You cannot use a Mini-Disc or Digital Audio Tape deck to copy 5.1 channel Dolby Digital sur- round sound Discs.

•Discs recorded in Dolby Digital should show this on the Disc or case. If the Disc is not recorded in 5.1 channel Dolby Digital sur- round sound, you will not hear multi-channel sound even if you use the Digital Stereo hookup.

Image 10

Magnavox 19MDTR20 owner manual Optional Connections, Analog Stereo Hookups, Digital Stereo Hookups

Contents

19MDTR20/27MDTR20 Color TV with BUILT-IN VCR For Customer Use Dear Magnavox product ownerModel No Serial No Safety Precautions Safety and General InformationDeclaration of Conformity Table of Contents Introduction Color Systems Playable DiscsRegion Codes Videotapes Before Using the TV/VCR/DVD Hooking Up the TV/VCR/DVD Not supplied, example only Hooking Up the TV/VCR/DVD cont’dIndoor Antenna Jacks on VCR example only Analog Stereo Hookups Optional ConnectionsDigital Stereo Hookups First-Time Setup,Watching TV Press VOL. / to adjust the volume Playing a Videotape Playing a Disc Remote Control Buttons Remote Control Buttons cont’d Front Panel ANT. Jack Antenna Power CordRear Panel Connect to a standard AC outlet 120V/60Hz Press Setup to exit the menu Menu Language, Resetting TV ChannelsResetting TV Channels Press or to select Channel SET UP Then, press Enter Adding/Deleting Channels Press Setup when you are finishedTo delete another channel, repeat steps You may have to reset the clock after a power failure Setting the ClockManual Clock Setting Press or to select Manual Clock SET Then, press Enter Until the correct day appears. Then, press B Setting the Clock cont’dWhile the DAY space is flashing, press or Appear Before you begin Auto Clock SettingTurn on the TV/VCR/DVD power Turn on the Cable Box/Satellite Receiver if applicable Will appear at the top of the screen. Use one These channels when you enter your AutoTV/DVD/VCR will search for a channel that Clock CH at step Daylight-Savings Time Want to disable this featurePress Setup to remove the menu Press or to select D.S.T. Then, press Picture Controls Status Displays, Picture ControlsStatus Displays Press Display again to see the current time Tape Speeds Videotape RecordingPut a videotape Hrs One-Touch Recording You cannot do an OTR with the remote controlPress REC/OTR on the front of the TV/VCR/DVD Channels are set. Details are on Timer RecordingBefore you begin, make sure Then, press B Or, to record a program at the same time on Timer Recording cont’dFinally, press B Same channel every weekday Monday AM or PM will appear with the hour Cancelling Timer Recordings Extending a Timer RecordingCorrecting a Timer Recording To cancel a timer recording that is in progress RETURN. To turn off Auto RETURN, press Enter to choose OFF instead Rerecording Tape Duplication PLAY, press Enter to select OFF Repeat PlayPlay B will appear on the screen briefly Press Enter until on appears beside Rental PlayPress or to select Rental RENTAL. To turn off RENTAL, press Enter to Zero Return Zero Return, Sleep TimerSleep Timer Press Sleep until Sleep 0 Minute appears Insert a videotape Time SearchLength of time by 10 minutes Time Search will not operate dur- ing recording Index Search Index Search 0 Forward and Reverse Searching SP/LP/SLP Videotape Playback FeaturesSlow Motion Super High Speed Searching LP/SLP Automatic Rewind, Eject, Off Automatic Operation FeaturesAutomatic Tracking Adjustment Manual Tracking Press Setup Press or to select Caption Closed Captions TV Rating Explanations Setting V-ChipTV Rating Settings TV/VCR/DVD is on Press or to select the TV Rating level at Setting V-Chip cont’dPress Setup to save your settings and remove the menus Which you want to block viewing, then press TV Rating Subratings Press Setup Press or to select V-CHIP SET UP Press EnterPress or to select TV Rating Press Enter Press or L to select the rating you wish to Adjust. Then, press Enter twice to go to itsWhen you select TV-Y7 Subratings Mpaa Rating Explanations Mpaa Rating SettingsPress or to select Mpaa Rating Then, press Enter Four Xs will appear instead of the code to pro Changing the Access CodeV-CHIP SET UP screen will reappear Press or to select Change Code Then, press Enter TV program is broadcast in second audio, SAP When a TV program is broadcast in stereo, StereoAppears in the top right corner of the screen. When a TV program is broadcast both in stereo and second Selecting HiFi or Monaural Sound Press Setup to exit the menusMulti-Channel Television Sound cont’d Press or to select VCR Audio Press SETUP. Press or to select USER’S Press or to select TV Audio Title Menus Disc Menus,Title MenusDisc Menus DVD’s Disc menu will appear During Disc play, press and hold i/g or On the remote for two seconds Title/Chapter Playback Title/Chapter Playback,Time PlaybackTime Playback Track Play Resume On Paused and Step-by-Step Play, Resume OnPaused and Step-by-Step Play During Disc play, press F pause Regular play will resume Repeat PlayOver. OFF will appear briefly on the TV screen Repeat play is not available with some Discs Markers Press Return to remove the display Subtitles Subtitles, Camera AnglesCamera Angles Or 1/2 the normal speed Slow Motion, ZoomZoom Times the regular size. ZOOM3 will appear First time you set a password, this menu will appear Parental PasswordPress Setup twice while play is stopped If you have set a password before, this menu will appear Power failure will not erase your password Parental Password cont’dScreen. Write down the password so you will not for Press p to select CHANGE, then press Enter Press B to select Custom at the top Menu, then press Enter Parental LevelsPress B to select the lock, then press Parental Levels cont’d Audio Language Stereo Sound Programmed Play Random Play, Programmed PlayRandom Play Random screen appears Jpeg Files have the icon 66 MP3/JPEG PlaybackTo stop play, press Stop C MP3 Files have the 3 icon MP3/JPEG Displays File name will appear when you first press DisplayPress Display again to remove the display Language Settings Language menu Language Settings cont’d Language Codes Display Settings Press B to select DISPLAY, then press If you selected Angle ICON, press Enter Display Settings cont’dRepeatedly to turn Angle Icon on or OFF. Press B to select Audio , then press Audio SettingsDolby Digital sound must be available on the DVD DVD Display On-Screen DisplaysAudio CD Display Black Level Adjust Black Level to brighten the DVD pictureVirtual Surround Glossary Helpful Hints Helpful Hints cont’d Other Specifications SpecificationsElectrical Specifications General TV/VCR Model # Serial # Limited Warranty19MDTR20 should be carried in for repair Magnavox, P.O. Box 520890, Miami, FL 33152 402 Index Remote controlWarranty Controls