Magnavox 25i manual HOW to Automatically Program TV Channels, Press Cursor UP or Down

HOW TO AUTOMATICALLY PROGRAM TV CHANNELS
our TV can automatically set itself
Yfor local area (or Cable TV) chan-
nels. This makes it easy for you to
select only the TV stations in your area
when the CHANNEL (+), (–)buttons
are pressed.
Note: Make sure the antenna or cable
signal connection has been completed
before AUTO PROGRAM is activated.
Press the MENU button on the
remote to show the on-screen menu.	Brightness
						+
Press the CURSOR UP ▲ or	–
DOWN ▼ buttons to scroll through							Install
the on-screen menu until the INSTALL
control appears on the screen.
Press the CURSOR RIGHT ▶		1	2	3	POWER
button. “Language” control will appear		4	5	6	CH+
on the screen.
Press CURSOR UP ▲ or DOWN		7	8	9	CH–	4
	6		0		2
▼ buttons to scroll the Install features		A/CH		CC			5
until the AUTO PROGRAM control		STATUS			VOL–	3
appears on the screen. Whatever chan-							Language
nel you are tuned to at the time will		EXIT		MENU			English
appear within the Auto Program con-	1	EP			MUTE
trol.
Press the CURSOR RIGHT ▶	2						Tuner Mode
button to start the Auto Program scan-
							Antenna
ning of channels. Auto Programming	4
will store all available channels in the
TV’s memory, then tune to the lowest
available channel when done.
When finished, press the STATUS
/EXIT button to remove the menu
from the TV screen.
							Auto Program
							3
SMART HELP
Try it out. Press the CHAN-
NEL (+), (–) buttons and see
which channels have been added to the
TV’s memory.
If you want to delete any unwanted chan-							Auto Program
nels from the TV’s memory, refer to the							7
section on adding and removing channels
(Channel Edit) on the next page.
			12