English 27
Symptom | Remedy | ||
| • Check if the power is on. | ||
| • Check if the correct input mode is selected. | ||
| • Check whether all the cables to the unit are connected to the correct output jack of your device like | ||
|
| ||
| • View other TV channels.The problem might be limited to the broadcasting station or weak signal | ||
|
| strength. | |
| • Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and turn on | ||
No picture or sound |
| the unit again. | |
• Check whether the connection of the antenna, cable receiver or satellite box is connected correctly. | |||
| |||
| • Make sure that the selected input mode is connected to the working input jack. | ||
| • Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode.Tap | ||
|
| any key on the keyboard to wake up your computer. | |
| • Make sure that the sound is not muted. Press MUTE so that the volume bar and current volume level | ||
|
| will appear on the TV screen. | |
| • Make sure that the volume is NOT set to [0] or [Mute]. If so, use VOL + / − to adjust the desired | ||
|
| volume. | |
| • View other TV channels.The problem might be limited to the broadcasting station or weak signal | ||
No color |
| strength. | |
| • Adjust [Color] in the main menu. | ||
|
|
| |
Adjusted [Picture] or [Sound] | • You must set [Home] in [Location]. ➠ p.23 | ||
settings are not effective every time | |||
the unit is turned on. |
| Otherwise, the settings you adjusted will not be memorized after the unit goes into standby mode. | |
|
| ||
|
| ||
| • Electrical interference from nearby appliances may affect picture quality. | ||
| • Adjust [Contrast] and [Brightness] in the main menu. | ||
Sound OK, picture poor | • | View other TV channels.The problem might be limited to the broadcasting station or weak signal | |
| strength. | ||
|
| ||
| • For the best picture quality, watch "High Definition" wide screen programs. | ||
|
| If the HD content is not available, watch "Standard Definition" programs instead. | |
| • View other TV channels.The problem might be limited to the broadcasting station or weak signal | ||
Picture OK, sound poor |
| strength. | |
| • Check if the audio cable is connected in correctly. | ||
|
| ||
You see a distorted picture or hear | • You may be getting interference from electrical appliances, automobiles, motorcycles or fluorescent | ||
| lights. | ||
an unusual sound. | • Try moving the unit to another location to see if this is the cause of the problem. | ||
| |||
|
| ||
Ghosts, lines or streaks in picture | • Electrical interference from nearby appliances may affect picture quality. | ||
• View other TV channels.The problem might be limited to the broadcasting station or weak signal | |||
|
| strength. | |
You see "noise" or "trash" on the | • When the capabilities of the unit exceed the capabilities of the digital broadcasting, the signal will be | ||
screen. |
| increased to match the capabilities of the display of the unit.This may cause noise or trash. | |
|
| ||
Different color marks on the TV | • View other TV channels.The problem might be limited to the broadcasting station, missing data or | ||
screen |
| pixelation. | |
You switch to a different input and | • This unit will memorize the volume level from the last time you adjusted it. | ||
the volume changes. | • | If the volume of the sound from another device is higher or lower, then the loudness will change. | |
|
|
| |
You switch to a different input and | • This unit will memorize the viewing mode from the last time you used the particular input modes. | ||
the screen size changes. | |||
|
| ||
|
| ||
The display image does not cover | • If you are watching TV or using the Composite Video, Component Video or HDMI with 480i Input, | ||
the entire screen. |
| press FORMAT repeatedly to switch various screen modes. | |
|
|
| |
Captions are displayed as a white | • Interference from buildings or weather conditions may cause captioning to be incomplete. | ||
box. No caption is displayed in | |||
• Broadcasting station may shorten the program to insert advertisement. | |||
the Closed | |||
| The closed caption decoder cannot read the information of the shortened program. | ||
program. |
| ||
|
| ||
|
|
| |
Black box is displayed on the TV | • | The text mode is selected for caption. Select | |
screen. | |||
|
|
Note
•The LCD screen is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red.
This is not to be considered a defect in the LCD screen.
•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for more details on correct operations.
INTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS CONNECTING DEVICES USEFUL TIPS INFORMATION