Magnavox 27MS343S owner manual Basic Antenna Connection, If your antenna has a round cable

Basic Antenna Connection

Acombination antenna receives normal broadcast channels (VHF 2-13 and UHF

14-69).Your connection is easy since you will connect the antenna to the 75 OHM ANTENNA INPUT jack on the rear of the TV.

1 If your antenna has a round cable

(75 ohm) on the end, then you're ready to connect it to the TV. Go to step 2.

If your antenna has flat twin-lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter (not supplied with TV).

2 Push the round end of the adapter or antenna cable onto the 75 OHM ANTENNA INPUT jack on the rear of the TV. If the round end of the antenna cable is threaded, screw it down tight.

Plug the TV’s power cord into a
power outlet and turn on the TV.
3 Set TV/CABLE to TV as detailed on page
11.
Refer to AUTO PROGRAM to set up your	OR
available TV channels. Details are on page
12.

75OHM

ANTENNA

INPUT

If you have separate UHF and VHF antennas, you need an optional combiner to connect the antennas to the TV.

UHF Antenna	UHF/VHF
	Combiner

VHF Antenna

Rear of TV

75-300 Ohm Adapter

VHF Antenna

6