1
BASIC ANTENNA AND CABLE CONNECTIONS
Your home’s signal input might come from a single (75 ohm) round cable, a
Converter Box, or from an antenna. In either case the connection to the TV is very easy.
If your Cable TV signal or
1Antenna signal is a round cable
(75 ohm) then you're ready to con- nect to the TV.
If your antenna has flat twin-
lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.
If you have a Cable Converter
Box: Connect the Cable TV signal to the Cable Signal IN(put) plug on the Converter.
Connect the Cable TV cable or
2Antenna cable (or 300 to 75 ohm adapter) to the 75Ω plug on the TV.
If you have a Cable Converter
Box: Connect the OUT(put) plug from the Converter to the 75Ω plug on the TV.
Antenna Connection
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
300 to 75Ω | Back of TV |
Adapter |
|
Twin Lead
Wire
Round Cable
75Ω
Direct Cable Connection
Cable signal coming from Cable Company
HELPFUL HINT
After using the AutoProgram Control, press the CH + and – buttons to scroll through all the channels stored in the television’s memory.
Back of TV
75Ω Round
Coaxial Cable
Jack Panel Back of TV
