17
SETTING UP AN ACCESS CODE
Over the next few panels you’ll learn how to block channels and get a better understanding of the rating terms for certain
programming.
First, let’s start by learning how to set a per- sonal access code:
Press the MENU button on the
1 remote to display the
Press the CURSOR UP ˚or
2 DOWN ¸buttons until the word FEATURES is highlighted.
Press the CURSOR RIGHT ˙
3 button to display the FEATURES menu options.
4 Press the CURSOR UP ˚or
Press the CURSOR RIGHT˙
5 button. The screen will read,
“ACCESS CODE - - - - .”
Using the NUMBERED buttons,
6 enter 0, 7, 1, 1. “XXXX” appears on the Access Code screen as you press the numbered buttons.
“INCORRECT CODE” will appear on the screen, and you will need to enter 0, 7, 1, 1 again.
The screen will ask you to enter a
7 “New Code.” Enter a “new” 4 digit code using the NUM- BERED buttons. The screen will then ask you to CONFIRM the code you just entered. Enter your new code again.“XXXX” will appear when you enter your new code and then display the Autolock™ menu options.
Proceed to the next panel to learn more...
