![](/images/new-backgrounds/1204953/20495323x1.webp)
HDMI-DVI Connection
Use an
Component Video Connection
Component Video connection offers better picture quality for video devices connected to the unit.
e.g.) |
|
|
32MF330B |
|
|
To HDMI1 |
|
|
Input jack only |
|
|
DVI |
|
|
ANALOG |
|
|
AUDIO |
|
|
|
|
|
conversion cable |
| audio cables |
STEREO |
|
|
PCM |
|
|
cab e receiver or satellit | box | |
with the DVI outpu | jack | |
DVI OUT |
|
|
rear of this unit |
AUDIO OUT
LR
If you connect to the unit’s Component Video Input jacks,
connect audio cables to the Audio L/R Input jacks right beside the Component Video connector.
e.g.)
32MF330B
rear of this unit
| DVI |
|
|
|
| ANALOG |
|
|
|
| AUDIO |
|
|
|
| audio cables | component video cables |
| |
|
|
| ||
|
| (red/blue/green) |
| |
AUDIO OUT | COMPONENT VIDEO OUT | |||
L | R | Y | Pb/Cb | Pr/Cr |
| TITLE | 5 |
|
|
| CHAPTER 15 |
|
| |
| REPEAT |
|
|
BD/DVD recorder with e component video output j
audio cables
T o HDMI1
Input jack only
audio cables
26MF330B
component video |
cables |
(red/blue/green) |
rear of this unit
Note
For HDMI connection
•The unit accepts 480i, 480p, 720p and 1080i of video signals, and 32kHz, 44.1kHz and 48kHz of audio signals.
•This unit accepts only 2 channel audio signal (LPCM).
•You need to select "PCM" for the digital audio of the device you connected or check the HDMI audio setting.There may be no audio output if you select "Bitstream", etc.
•This unit accepts only signals in compliance with EIA861.
For HDMI-DVI connection
•The unit accepts 480i, 480p, 720p and 1080i video signals.
•
•DVI does not display 480i image which is not in compliance with EIA/
4 | . | 2T | 2D | ; |
rear of this unit
Note
•The unit accepts 480i / 480p / 720p and 1080i of video signals for this connection.
S-Video Connection
12
EN