XP AZ 2025/17.1
AZ 2025 /17 page 12 |
|
DIGITAL TUNER | CD PLAYER |
English
Programming radio stations
You can store up to a total of 30 radio stations in the memory.
1.Tune to your desired station (see Tuning to radio stations).
2.Press PROGRAM to activate programming.
– Display: PROGRAM flashes.
3.Press PRESET 4 or 3 once or more to allocate a number from 1 to 30 to this station.
4.Press PROGRAM again to confirm the setting.
–Display: PROGRAM disappears, the preset number and the frequency of the preset station are shown.
5.Repeat the above four steps to store other stations.
•You can overwrite a preset station by storing another frequency in its place.
Tuning to preset stations
Press PRESET 4 or 3 until the desired preset station is displayed.
PLAYING A CD
BATT |
LOW |
This CD player plays Audio Discs including
1.Select CD source.
™ 
is displayed briefly.
2.Press OPEN•CLOSE to open the CD compartment.
™ Display: | when you open the CD compartment. |
3.Insert a CD with the printed side facing up and press
OPEN•CLOSE to close the CD compartment.
™Display: the CD player scans the contents of a CD, and then the total number of tracks and playing time are shown.
Display: 
is shown if you have inserted a
non-finalized CD-R(W).
4.Press PLAY•PAUSE 2; (on the remote control 2;) to start
playback.
™Display: Current track number and elapsed playing time of the track during CD playback.
5.To pause playback press PLAY•PAUSE 2;. Press PLAY•PAUSE 2; again to resume play.
™Display: the elapsed playing time flashes when playback is on pause.
6.To stop CD playback, press STOP 9.
Note: CD play will also stop when:
–the CD door is opened;
–the CD has reached the end
(unless you have selected REPEAT or REPEAT ALL);
–you select another source: TAPE / TUNER.
BATT |
LOW |
12
