Magnavox AZ202517 manual General Information on Recording, Synchro Start CD Recording

XP AZ 2025/17.1 08-05-2000 16:10 Pagina 16

English

AZ 2025 /17 page 16

RECORDING

GENERAL INFORMATION ON RECORDING

•Recording is permissible insofar as copyright or other rights of third parties are not infringed.

• This deck is not suitable for recording on CHROME (IEC II) or	X
METAL (IEC IV) type cassettes. For recording, use NORMAL type
cassettes (IEC I) on which the tabs have not yet been broken.

•The best recording level is set automatically. Altering the

VOLUME, INCREDIBLE SURROUND, DIGITAL DYNAMIC BASS BOOST or ULTRA HIGH CLARITY controls will not affect the recording in progress.

•At the very beginning and end of the tape, no recording will take place during the 7 seconds when the leader tape passes the

recorder heads.

• To protect a tape from accidental erasure, have the tape in front of you and break out the left tab.

Recording on this side is no longer possible. If, however, you wish to record over this side again, cover the tabs with a piece of adhesive tape.

SYNCHRO START CD RECORDING

1.Select CD source.

2.Insert a CD and if desired, program track numbers.

3.Press STOP•OPEN 9/ to open the cassette door.

4.Insert a suitable cassette into the cassette deck and close the cassette door.

5.Press RECORD 0 to start recording.

–Playing of the CD program starts automatically from the beginning of the program. It is not necessary to start the CD player separately.

To select and record a particular passage within a track

•Press and hold down SEARCH ∞ or § (on the remote control ¡ or ™).

•When you recognize the passage you want, release SEARCH ∞ or §.

•To pause CD playback press PLAY/PAUSE 2; (on the remote

control 2;).

–Recording will begin from this exact point in the track when you press RECORD 0.

6.For brief interruptions press PAUSE ;. To resume recording, press PAUSE ; again.

7.To stop recording, press STOP•OPEN 9/.

BATT

LOW

BATT

LOW

16