Magnavox AZ 1045 manual English, General Information On Recording, Synchro Start Cd Recording

RECORDING

GENERAL INFORMATION ON RECORDING

•Recording is permissible insofar as copyright or other rights of third parties are not infringed.

•This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording, use NORMAL type cassettes (IEC I) on which the tabs have not been broken.

•The best recording level is set automatically. Altering the VOLUME and DBB controls will not affect the recording in progress.

•At the very beginning and end of the tape, no recording will

take place during the 7 seconds, when the leader tape passes
the recorder heads.
• To protect a tape from accidental erasure, have the tape in
front of you and break out the left tab.
Recording on this side is no longer possible. To record over this	1
side again, cover the tabs with a piece of adhesive tape.

English

SYNCHRO START CD RECORDING

1.Select CD source.

2.Insert a CD and if desired, program track numbers.

3.Press STOP•OPEN 9/ to open the cassette door.

4.Insert a suitable cassette into the cassette deck and close the cassette door.

5.Press RECORD 0 to start recording.

–Playing of the CD program starts automatically from the beginning of the program. It is not necessary to start the CD player separately.

6.For brief interruptions press PAUSE ;. To resume recording, press PAUSE ; again.

7.To stop recording, press STOP•OPEN 9/.

To select and record a particular passage

•Press SEARCH ∞ or §. When you recognize the passage you want, release SEARCH controls.

•To interrupt CD playback press PLAY/PAUSE 2; (on the remote control 2;).

–Recording will begin from this exact point in the track when you press RECORD 0.

D	BB	AZ	1045
VO
LUME

OR			D
			IGITAL
			TUNER
				PR
MODE
PLAY•	PAUSE			BATT
		STOP	PROG	LOW
	SEARCH

15