40 Timer Recording With the VCR Plus+ Programming System
Follow the steps below to program a timer recording using the PlusCode programming numbers in your TV guide. Before you begin, make sure:
●The clock has been set. If not, CLOCK MUST BE SET appears.
●Channels are programmed.
●There is a tape in the TV/VCR (make sure the tape’s record tab is intact and the tape is long enough to record the program).
●You have completed the steps on pages 38-39.
POWER |
| EJECT |
SLEEP/WAKE UP | SPEED | MEMORY |
REC/OTR |
| PAUSE/STILL |
Complete each step within 60 seconds of completing the previous step. If you don’t, you may return to step 1.
1
Press the COMBI button, then press the VCR PLUS+/ENTER button.
| PLAY |
| 3 |
REW | STOP | F.FWD | |
MENU | STATUS/EXIT | CLEAR |
|
1 2 3
CH.
4 5 6
VCR PLUS+ PROGRAM
PLUS CODE : – – – – – – – –
1
TO END PRESS EXIT
2
Press the Number buttons to enter the PlusCode pro- gramming number of the program you wish to record (this number is different for every program). Finally, press the VCR
PLUS+/ENTER button.
VCR PLUS+ PROGRAM
PLUS CODE : 89687 – – –
TO SET PRESS VCR +
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
7 | 8 | 9 |
|
FM | 0 | SURF | VOL. |
|
|
| |
CABLE/DBS | COMBI |
|
|
|
| VCR PLUS+ |
|
VAR.SLOW | /ENTER | MUTE | |
TRACKING | F.ADV | SLOW | |
SMART
SKIP INDEX PICTURE SOUND SEARCH SEARCH
2
3
Press the PLAY/▲ button or the STOP/▼ button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button.
●ONCE: The VCR will record a TV program on any day you choose, up to 12 months away.
●DAILY: The VCR will record every day from Monday to Friday
– starting at the same time and recording for the same length of time.
●WEEKLY: The VCR will record on the same day, at the same time, and for the same length of time every week.
VCR PLUS+ PROGRAM
>ONCE
DAILY (MON - FRI)
WEEKLY
SELECT ▲▼ CHOOSE B
TO END PRESS EXIT
Helpful Hints
•You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 33.
•If CODE ERROR flashes after you enter the PlusCode programming number and press the VCR PLUS+/ENTER button, the number you entered was incorrect (for exam- ple, too short). If this happens, enter the correct number.
•CLASH may flash on the screen after you complete step 2. This means that the timer recording you just pro- grammed and another timer record- ing overlap, and thus the current timer recording will not be carried out.
