Magnavox DVD400AT manual Before Calling Service Personnel

Models: DVD400AT

1 44
Download 44 pages 33.28 Kb
Page 39
Image 39
Before Calling Service Personnel

Before Calling Service Personnel

Check the following guide for the possible cause of a problem before requesting service.

Symptom

Cause

Correction

No power

The power plug is disconnected.

Connect the power plug into the wall outlet

 

 

 

securely.

The poweris on,but the DVD

No disc is inserted.

Insert a disc, (Chask that the DVD or audio

videoplayerdoes notwork.

 

 

CD indicator in the DVD display is lit.)

No picture

The TV is not set to receive a DVD signal.

Set your TV to accept Auxiliary input,

 

The video cable is not connected

Connect the vidso cabio to the jacks

 

 

securely.

 

securely.

 

The TV power is turoed off.

• Turn on theTV,

No sound

[ The equipment connected with the audio

Select the correct input mode of the audio

 

 

cable is not set to receh_e the DVD signal.

 

receiver so you can listen to the sound

Page

11, 12

15

15

11, 12, 13, 14

15

15

"_neplaybackpicturehas occasionaldistortion.

The audio cablesare notconnected securely.

The powerof the equipmentconnected with the audiocable isturned off.

The AUDIO SELECTOR is set to the wrongposition.

The disc is dirty.

fromthe DVD videoplayer.

Connect the audio cable to the jacks securely.

"rum on the equipment connected with the audio cable.

Set the AUDIO SELECTOR to the correct position, then turn on the DVD video player again by pressing the POWER button.

Eject the disc and clean it.

Sometimes a small amount of picture

distortion may appear. This is not a mulfunction.

11, 12, 13, 14

15

11, 12, 13, 14

37

The OVD video player does not

I

No disc is inserted.

start playback.

 

 

 

An unplayable disc is inserted.

 

The disc is placed upside down.

 

The disc is not placed within the guide.

 

The disc is dirty.

 

• A menu is on the TV screen.

 

The parental lock function is set.

Buttonsdo notwork.

Power supply fluctuations or other

 

abnormalities may interrupt correct

 

operation.

I " Insert a disc. (Check that the DVD or audio CD indicator in the DVD display is lit.)

Insert a playable disc. (Check the disc type and color system,)

Place the disc with the playbeok side down.

Place the disc in the disc tray correctly inside the guide.

Clean the disc.

Press the SET UP button to remove the menu screen.

Cancel the parental lock function or change the parsofal lock level

Turn the power on or off with the POWER button. Or disconnect the power plug and insert it into the wall outlet again.

15

37

15

15

37

35,36

The remotecontroldoes not work properly.

The remote control is not pointed at the remote sensor of the DVD video player.

The remote control is too far from the

DVD video player. ,

There is an obese between the remote control and the DVD video player.

The battefles in the remote control are exhausted.

Point the remote control at the remote sensor of the DVD video player.

Operate the remote control within about seven meters.

Remove the obstacle.

Replace the batteries with new ones.

10

10

10

38m

Page 39
Image 39
Magnavox DVD400AT manual Before Calling Service Personnel