3 | Mount it |
Ask a friend to help out.An extra hand to hold the unit makes mounting easier and |
quicker.
A | A | |
• | Cut the template to fit inside the cabinet. |
|
• | Align the template border marked "FRONT" along | Template |
| the front edge of your cabinet. |
|
•Use adhesive tape to fix the template.
• Drill 1/4 inch holes, as marked 
on the template.
•Remove the template when you finish drilling.
B
Using the spacers
A total of 16 spacers are supplied. Depending on the |
|
thickness of your cabinet bottom (with or without an | B |
overhang), you can select 4 spacers of the best length to |
|
mount the set. |
|
•Measure the height of the cabinet bottom and/or overhang.
• Select 4 spacers of the optimum length.
• Insert the spacers accordingly.
C
•Manually fasten 4 long screws (selected according to
actual situation) down into the spacer holder holes to | C |
mount your set. Start screwing at opposite corners of |
|
the unit for better support. |
|
Mounting Screw
Tip
–Clean the bottom of the cabinet surface and also empty your cabinet before mounting.
–Place the unit in a clean, safe place when drilling to avoid wood shav- ings dropping into the ventilation slots.
–Use a nail to start each drill hole.
–Drill from the bottom upwards if you do not have enough room inside the cabinet.
–Hold your drill firmly at 90o with the cabinet bottom and drill holes at low speed.
–Clear wood shavings.
Tip
To prevent damage to your set, do not use an electric drill to secure screws when mounting!
4 | Use it |
For full details, please read and follow the instructions inside the User manual. |
A
Power supply
• Connect the power plug to the wall outlet.
• Press POWER to switch on.
B
Using the LCD screen
•Pull out the LCD screen under the unit and swivel round as shown.
• To store away, swivel and tuck. Push back until you hear a click.
Tip
–Swivel with care to avoid breakage. Screen rotates a maximum 2700 only.
D
How to watch TV on the unit
•Ensure normal TV antenna and power cord connection.
•Switch on the system.
•Press TV on the remote control or SOURCE on the front panel to switch to the TV mode.
•Enter TV SETUP.
•Press 3 / 4 to select Fine Tuning or Auto Memory to store channels.
•After exiting TV SETUP, press 3 / 4 on the remote control to select the desired channel, or use the Numeric Keypad
115
POWER SUBTITLE AUDIO EJECT
DVD
1 2 3
TV
4 5 6
AV
7 8 9
FM/AMGOTO
+10 0
TV/LCD SETUP | DVD SETUP 16:9/4:3 | |
| CH+ |
|
|
| INFO |
| OK |
|
SET | TIME | LCD |
ON/OFF | ||
-
-SEEK +
MUTE
270 maximum
C
How to play a DVD /CD
•Select DVD source.
•Insert a DVD/CD.
•Press PLAY/PAUSE 2; to start disc playback.
Insert DVD/CD
POWER SUBTITLE AUDIO EJECT
DVD |
|
|
1 | 2 | 3 |
TV |
|
|
4 5 6
AV
7 8 9
FM/AMGOTO
+10 0
TV/LCD SETUP | DVD SETUP 16:9/4:3 |
| CH+ |
| INFO |
OK
E
Improve radio reception
FM: place the antenna as far as possible from the AC adaptor to avoid interference.
AM: always mount the antenna vertically.
AM
