Sound
Digital Audio Output
Each DVD disc has a variety of audio output options. Set the DVD+VCR’s Digital Audio Output according to the type of audio system you use.
DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if you have connected the DVD+VCR’s DIGITAL AUDIO OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). Stream/PCM: Select Stream/PCM if you have connected the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder.
PCM: Select when connected to a 2 channel digital stereo amplifier. The DVD+VCR outputs sounds in the PCM 2ch format when you play a DVD video disc recorded with a Dolby Digital, MPEG1, or MPEG2 recording system.
Disc Audio | DIGITALDOLBY /PCM |
Disc Subtitle | Stream/PCM |
Disc Menu | PCM |
Rating |
|
Country Code | Sample Freq. |
TV Aspect | 48 KHz |
Menu Language | 96KHz |
Progressive Scan |
|
Digital Audio Output |
|
5.1 Speaker Setup |
|
Others |
|
Sample Frequency
To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. With this selection the DVD+VCR will automatically convert any 96KHz signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling 96KHz sig- nals, select 96KHz. With this selection the unit will pass each type of signal through without any further processing.
Getting Started 19
Others
The DRC, Vocal, PBC and Auto Play settings can be changed.
∀Use v/V to select the desired option and press OK. The setting of the selected option is changed between On and Off.
Disc Audio | DRC | On |
Disc Subtitle | Vocal | On |
Disc Menu | PBC | Off |
Rating | Auto Play | Off |
|
| |
Country Code |
|
|
TV Aspect |
|
|
Menu Language |
|
|
Progressive Scan |
|
|
Digital Audio Output |
|
|
5.1 Speaker Setup |
|
|
Others |
|
|
Dynamic Range Control (DRC)
With DVD digital audio technology, you can hear a pro- gram’s soundtrack in the most accurate and realistic presen- tation possible. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect.
Vocal
Set Vocal to On only when a
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played with PBC active or in place.
Off: Video CDs with PBC are played the same way as Audio CDs.
Auto Play
You can set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, the DVD player will search a title with the longest playback time and then play back the title automatically.
On: Auto Play function is active.
Off: Auto Play function is turn off.
Note
The Auto Play function may not work for some DVDs.
English
