|
|
|
| Troubleshooting 35 | |
| |||||
Check the following guide for the possible cause of a problem before contacting service. | |||||
|
|
|
|
| |
|
|
|
|
| |
Symptom |
| Cause |
| Correction | |
|
|
|
|
| |
No power. | ∀ | The power cord is disconnected. | ∀ | Plug the power cord into the wall outlet | |
|
|
|
| securely. | |
The power is on, but the | ∀ | No disc is inserted. | ∀ | Insert a disc or tape. (Check that the disc | |
DVD+VCR does not | ∀ | No tape is inserted. |
| or tape indicator in the display | |
work. |
| window is lit.) | |||
|
|
| |||
|
|
|
|
| |
No picture. | ∀ | The TV is not set to receive DVD+VCR | ∀ | Select correct video input mode on the TV | |
|
| signal output. |
| so the picture from the DVD+VCR | |
|
|
|
| appears on the TV screen. | |
| ∀ | TV/VCR mode for DVD+VCR is set to | ∀ | Press the TV/VCR button on the remote | |
|
| TV. |
| control repeatedly to choose VCR mode. | |
|
|
|
| TV indicator disappears in the display win- | |
|
|
|
| dow. | |
| ∀ | The video cable is not connected securely. | ∀ | Properly connect the video cable. | |
|
|
|
|
| |
| ∀ | The connected TV power is turned off. | ∀ | Turn on the TV. | |
|
|
|
|
| |
No sound. | ∀ | The equipment connected with the audio | ∀ | Select the correct input mode of the audio | |
|
| cable is not set to receive DVD+VCR sig- |
| receiver so you can listen to the sound | |
|
| nal output. |
| from the DVD+VCR. | |
|
|
|
|
| |
| ∀ | The audio cables are not connected | ∀ | Properly connect the audio cable. | |
|
| securely. |
|
| |
|
|
|
|
| |
| ∀ | The power of the equipment connected | ∀ | Turn on the equipment connected with | |
|
| with the audio cable is turned off. |
| the audio cable. | |
| ∀ | The Digital Audio Output is set to the | ∀ | Set the Digital Audio Output to the | |
|
| wrong position. |
| correct position, then turn on the | |
|
|
|
| DVD+VCR again by pressing POWER. | |
|
|
|
|
| |
The playback picture is | ∀ | The disc is dirty. | ∀ | Clean the disc. | |
poor. |
|
|
|
| |
∀ | Tape heads are dirty. | ∀ | Clean video heads. | ||
| |||||
|
|
|
|
| |
| ∀ | Tape is a rental or was recorded on | ∀ | Use 3/4 for manual tracking adjustment | |
|
| another VCR. |
| while tape is playing. | |
|
|
|
|
| |
The DVD+VCR does not | ∀ | No disc is inserted. | ∀ | Insert a disc or tape. (Check that the disc | |
| or tape indicator in the display | ||||
start playback. | ∀ | No tape is inserted. |
| ||
| window is lit.) | ||||
|
|
|
|
∀An unplayable disc is inserted.∀ Insert a playable disc. (Check the disc type, color system, and Regional code.)
| ∀ | The disc is placed upside down. | ∀ | Place the disc with the playback side down. |
| ∀ | The disc is not placed within the guide. | ∀ | Place the disc on the disc tray correctly |
|
|
|
| inside the guide. |
| ∀ | The disc is dirty. | ∀ | Clean the disc. |
|
|
|
|
|
| ∀ | The Rating level is set. | ∀ | Cancel the Rating function or change the |
|
|
|
| rating level. |
|
|
|
| |
The remote control does ∀ | The remote control does not work. | ∀ | Point the remote control at the remote | |
not work properly. |
|
| sensor of the DVD+VCR. | |
| ∀ | The remote control is too far from the | ∀ | Operate the remote control within 23 ft |
|
| DVD+VCR. |
| (7 m). |
|
|
|
|
|
| ∀ | There is an obstacle in the path of the | ∀ | Remove the items that could block signal. |
|
| remote control and the DVD+VCR. |
|
|
| ∀ | The batteries in the remote control are | ∀ | Replace the batteries with new ones. |
|
|
| ||
|
| exhausted. |
|
|
| ∀ | This remote control use the same | ∀ | When using a VCR, first press the VCR |
|
| button. When using a DVD, first press the | ||
|
| buttons for VCR and DVD functions |
| |
|
|
| DVD button. | |
|
| (ex. PLAY). |
| |
|
|
|
|
English