Magnavox MPD820 owner manual Connecting to additional equipment

MPD820_17.qxd 4/2/04 9:11 AM Page 35

Connecting to additional equipment

Connecting to a TV Only

TV has only a single Antenna In or RF-In jack

Before you begin, make sure you have an RF modulator and extra RF coaxial cables. These are not supplied with the player, but are available from Magnavox or most consumer electronics retailers.

1Connect the black end of the supplied cable to the player’s AUDIO / VIDEO jack. Connect the other yellow end to the VIDEO IN jack on the RF modulator. The VIDEO IN jack on the RF modulator is usually yellow and might be labelled VIDEO, CVBS, COMPOSITE, or BASEBAND.

2Connect the red end of the same cable to one of the AUDIO IN jacks on the RF modulator. Audio jacks on the RF modulator usually are red (right) and white (left). Match the cable color to the jack color.

3You probably already have an antenna or Cable TV signal connected to the ANTENNA IN jack on your TV.

Disconnect it now from the TV. Reconnect the antenna or Cable TV signal to the ANTENNA IN jack on your RF modulator.

IMPORTANT!

MAKE SURETV OUT /TFT ON IS ATTHE TV OUT POSITION. OTHERWISE,THERE WILL BE NO DISPLAY ON YOUR TV!

35