Magnavox MPDR-3328CPE Annually, Procedure, ) on page, Procedure, Periodically, ) or Figure 12, DO NOT TOUCH OR, Maintenance Task, Maintenance Task, Maintenance Schedule

Maintenance Schedule

Annually (Before the onset of the Burning Season)

Maintenance Task	Accomplishing Person	Procedure
Inspecting/Cleaning Burner, Logs	Qualified Service Technician	Inspect valve and ensure it is properly operating.
and Controls		Check piping for leaks. Vacuum the control
		compartment, fireplace logs and burner area.
Check Flame Patterns and Flame Height	Qualified Service Technician	Refer to Figure 7 (MPD-3328), 8 (MPD-3530)
		or 9 (MPD-4035, MPD-4540) on page 7 and
		verify the flame pattern and height displayed
		by the appliance conforms to the picture.
		Flames must not impinge on the logs.
Inspecting/Cleaning Pilot and Burner	Qualified Service Technician	Refer to Figure 10 (SIT Millivolt), Figure 11
		(Honeywell Millivolt) or Figure 12 (Elec-
		tronic) on page 8. Remove any surface
		build-up on pilot and burner assembly. Wipe
		the pilot nozzles, ignitor/flame rod and hood.
		Ensure the pilot flame engulfs the flame
		sensor as shown.
Checking Vent System	Qualified Service Technician	Inspect the vent system at the top and at the
		base (within the firebox) for signs of blockage
		or obstruction. Look for any signs of disloca-
		tion of the vent components.
Appliance Checkout	Qualified Service Technician	Perform the appropriate appliance checkout
		procedure detailed in this manual.
Replacing Rockwool Ember Materials	Homeowner/Qualified Services Technician	Remove old ember materials and vacuum the
		screened rockwool placement area. Place new
		rockwool as described in this document.
Periodically (After the Burning Season)
Maintenance Task	Accomplishing Person	Procedure
Cleaning Firebox Interior	Homeowner	Carefully remove logs, Rockwool and volca-
		nic stone if used. Vacuum out interior of the
		firebox. Clean firebox walls and log grate.
		Replace logs, Rockwool and volcanic stone
		as detailed in this manual.
Check Flame Patterns and Flame Height	Homeowner	Refer to Figure 7 (MPD-3328), 8 (MPD-3530)
		or 9 (MPD-4035, MPD-4540) on page 7 and
		verify the flame pattern and height displayed by
		the appliance conforms to the picture. Flames
		must not impinge on the logs.
Checking Vent System	Homeowner	Inspect the vent system at the top and at the
		base (within the firebox) for signs of block-
		age or obstruction. Look for any signs of
		dislocation of the vent components.
Cleaning Front Glass Enclosure Panel	Homeowner	Clean as necessary following the directions
		provided in this manual. DO NOT TOUCH OR
		ATTEMPT TO CLEAN GLASS WHILE HOT.

5