Connections
Connection to an Audio System•When you change the connections, all devices should be turned off.
•Refer to the operation manual accompanying external devices for more information.
Method 1 | Method 2 |
Stereo system | Dolby Digital decoder, |
AUDIO | MD deck or DAT deck |
Analog audio | COAXIAL Digital audio |
input jacks | input jack |
Audio cable (supplied)
This unit | DVD/VCR | |
IN - AUDIO - OUT | ||
<REAR PANEL> | L | |
R | ||
|
AUDIO OUT | or |
| DVD |
| AUDIO |
| OUT |
| L |
| R |
Note
•Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
Audio Coaxial Digital cable | DVD | |
(commercially available) | ||
AUDIO OUT | ||
| DIGITAL |
COAXIAL
DIGITAL
AUDIO OUT
Setting | Setup>Playback>Disc Audio>Digital Out> | |
Connection | PCM | Dolby Digital |
If output is Dolby Digital |
|
|
encoded audio, connect to a | - | STREAM |
Dolby Digital decoder. |
|
|
Unless connected to a Dolby | - | PCM |
Digital decoder. | ||
Connecting to an MD deck or |
|
|
DAT deck. | - | PCM |
* To complete these settings, refer to pages
Note
•By connecting this unit to a
•The audio source on a disc in a Dolby Digital Multi- channel surround format cannot be recorded as digital sound by an MD or DAT deck.
•Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
16 EN