Sharp 100-EVIK manual

Models: 100-EVIK

1 4
Download 4 pages 58.95 Kb
Page 2
Image 2

VisiKey™ Wired Keyboard Manual

Thank you for purchasing the new VisiKey™ Enhanced Visibility Internet Keyboard.

Software Installation

Depending on your Windows™ System, you may not need to install software to use your keyboard. See section titled “System Requirements” to see if you need to install software.

System Requirements

IBM PC compatibles

USB or PS/2 port for keyboard

Microsoft Windows™ Me, 2000 and XP

a)If you are operating Windows™ XP, 2000, or ME, you do not need to install any software. Proceed to Connect Your Keyboard.

b)If you are operating Windows™ 95 or Windows™ 98, install the software provided before attempting to connect the keyboard.

1.Insert software.

2.Double click installer icon.

3.Follow instructions.

Connect Your Keyboard

PS/2 Connection (recommended)

1.Shut down and turn off your computer.

Make sure the USB-to-PS/2 adaptor (green) is attached to the Universal Serial Bus (USB) connector and then plug it into your computers round PS/2 keyboard port.

2.Turn on your computer.

3.Enjoy using your VisiKey™ Enhanced Visibility Internet Keyboard.

USB Connection (advanced and laptop users only)

If your keyboard has a Universal Serial Bus (USB) connector, you can plug it into your computer’s USB port. However, a PS/2 connection is recommended because some computers do not fully support USB keyboards.

1.With your computer turned on, plug the rectangular USB connector into your computer’s rectangular USB port.

2.Enjoy using your VisiKey™ Enhanced Visibility Internet Keyboard.

2 of 4

Page 2
Image 2
Sharp 100-EVIK manual